Hunting / Fishing / Outdoor

Sea Dog Side Mount Rod Storage Black - 707570

Injection Molded Polypropylene 707568 Two Pole Rod Holder is one piece, no assembly required. Holds knife & tackle. 707570 Three Pole Rod Holder is one piece, no assembly required. Holds knife,pliers and tackle.Kimpex Data: Barcode: 779422578991...

Sea Dog Flush Mount Rod Holder - 708965

These Flush Mount Rod Holders can accommodate rods up to 1-5/8” in diameter. Features a 30 degree angle. Proudly constructed in the USA of UV resistant injection molded ABS. Installs with three 1/4” FH fasteners (not included).Kimpex Data: Barcode:...

Sea Dog Trolling Motor Plug - 708731

Injection molded PVC 12 or 24 volt, 30 amp rated with two 10 gauge leads 42683-1 fits on 1-1/8" holeKimpex Data: Barcode: 779421042028 Supplier Number: 426184-1Kimpex Catalog Number: 708731

Sea Dog Trolling Motor Receptacle - 708730

Injection molded PVC 12 or 24 volt, 30 amp rated with two 10 gauge leads Fits 1-1/8" holeKimpex Data: Barcode: 779421042011 Supplier Number: 426183-1Kimpex Catalog Number: 708730

Sea Dog Side Mount Rod Holder - 707578

Injection Molded Polypropylene Tube length : 11-11/16” Hole diameter : 1-3/4” Kimpex Data: Barcode: 779422579011 Supplier Number: 325120-1Kimpex Catalog Number: 707578

Sea Dog Side Mount Rod Holder - 707577

Injection Molded Polypropylene Tube length : 11-11/16” Hole diameter : 1-3/4” Kimpex Data: Barcode: 779422579004 Supplier Number: 325121-1Kimpex Catalog Number: 707577

Sea Dog Side Mount Rod Storage Black - 707568

Injection Molded Polypropylene 707568 Two Pole Rod Holder is one piece, no assembly required. Holds knife & tackle. 707570 Three Pole Rod Holder is one piece, no assembly required. Holds knife,pliers and tackle.Kimpex Data: Barcode: 779422578984...

Attwood HD Rail Mount Rod Holder - 706978

Heavy Duty Rail Mount Rod Holder for use with the Attwood Combo Mount. Complete with all necessary hardware to mount to rails from 3/4" to 1 1/4" in width. 3 Year WarrantyKimpex Data: Barcode: 779421418441 Supplier Number: 5012-7Kimpex Catalog Number:...

Greenfield Skillet - 706437

Don’t burn the catch in a too-light fry pan! Perfect for cookouts over campfires, charcoal grill or indoor fireplace. 10’’ to 20 1/2’’, 14 guage teel, with long, sturdy, detachable handles. Will last a lifetime! Specific 3 tier design for perfect...

Greenfield Skillet - 706436

Don’t burn the catch in a too-light fry pan! Perfect for cookouts over campfires, charcoal grill or indoor fireplace. 10’’ to 20 1/2’’, 14 guage teel, with long, sturdy, detachable handles. Will last a lifetime! Specific 3 tier design for perfect...

Springfield BBQ - 703015

Thread-Lock Post Surface mount base Wobble-free post Ceramic coated thermal plate Built-in regulator for 1 lbs fuel tank 12,000 BTU 189 in2 cooking area / 130 in2 grilled surfaceKimpex Data: Barcode: 779421303341 Supplier Number: 1940052Kimpex Catalog...

KUUMA Quick-Release Rail Grill Mount - 734362

The Quick Release Rail Mount allows you to quickly mount and dismount your BBQ without unscrewing any hardware and without the use of tools. It features a quick-release knob for fast and easy set-up and break-down. It is constructed of anodized...

KUUMA Pedestal Grill Mount - 734357

The perfect way to mount your Kuuma BBQ in stationary locations such as a dock, deck, swim platform or patio. 30 inches tall. Additional mounting rings can be installed to provide multiple locations for your pedestal mount.Kimpex Data: Barcode:...

KUUMA Universal Rail Grill Mount - 734356

The Universal Single Axis Rail Mount solves many standard mounting problems by allowing you to mount and level your Kuuma BBQ on any angle rail from vertical to horizontal. Works with any square or round rail 7/8"-1¼". Made of anodized aluminum with...

KUUMA 60º Rod Holder Grill Mount - 734353

Kuuma's rod holder mount enables you to turn any fishing rod holder into a BBQ mount. The rod holder mount has a 60 degree angle and an adjustable height. Fits into most rod holders with cross pins.Kimpex Data: Barcode: 779421469559 Supplier Number:...

KUUMA Elite 216 Gas Grill - 734352

The Elite 216 BBQ features a simple control knob for precise heat control. A more compact size grill with all the premium features of the Elite 316; simple control knob, integrated fold-away legs, removable warming rack, built-in thermometer, piezo...

KUUMA Stow N' Go 125 Gas Grill - 734351

The Kuuma Stow N' Go 125 BBQ is an outstanding grill that offers premium-quality construction and convenient portability. Its compact size is perfect for when space is at a premium. Stow N' Go Grills can be easily transported and can also be mounted to...

KUUMA Stow N' Go 160 Gas Grill - 734350

Designed for high pressure, disposable 1 lb. propane canisters or larger refillable tanks with hose attachment. Canisters, tanks and hoses sold separately. Stainless steel construction Heat output of 13 000 BTUs Double locking lid Stay cool handle...

KUUMA Stow N' Go 160 Gas Grill - 734349

Designed for high pressure, disposable 1 lb. propane canisters or larger refillable tanks with hose attachment. Canisters, tanks and hoses sold separately. Stainless steel construction Heat output of 13 000 BTUs Double locking lid Stay cool handle...

KUUMA Profile 150 Gas Grill - 734348

Designed for high pressure, disposable 1 lb. propane canisters or larger refillable tanks with hose attachment. Canisters, tanks and hoses sold separately. Dimensions: 24 in Length x 7.88 in Depth x 11.88 in Height Weight: 12.5 lbs. Cooking Surface...

KUUMA Stow N' Go 160 Charcoal Grill - 734347

Uses any standard charcoal. Includes inner lid liner to help protect cover from high-heat discoloration. Dimensions: 18.5 po Length x 11.25 po Depth x 11 po Height Weight: 16 lbs. Cooking Surface Area: 160 square inches The Kuuma Stow N' Go 160 BBQ is...

Trac Outdoor Fishing Barometer - - 734224

Track pressure trends for greater fishing success! Easy to calibrate for local barometric pressure Adjustable pressure change indicator Color coded dial shows typical conditions for great, good or poor fishing 3.5 inch Diameter Sure-grip ABS plastic...

Sea Dog Flush Mount Rod Holder with Cap - 702768

Stamped 316 Stainless. 30° angle. Slim lines stainless steel construction with UV resistant PVC cap and full length PE liner. This new design has the same liner cap that is used on the cast stainless steel rod holder, item number 325235. Tube length : 8...

Trac Outdoor High-Current Plug Trolling motors - 734205

Quick-connect plug for high current 12v or 24v power Heavy AWG Marine-Grade Tin-Plated Copper Pig-tail Wires Heat shrink butt-splices 8 gauge for 50 amp 12v or 24v power (single plug item T10138) 10 gauge for 40 amp 12v or 24v power (single plug item...

IRONWOOD PACIFIC Sticky Board - 780414

The cutting boards that stick to the counter! Maybe you’ve used cutting boards that slide around the counter when cutting your food items. The Stickyboard’s suction cups anchor the board to the counter for secure cutting. Not only that, the suction cups...

Greenfield Downrigger Weights - 780268

Available in both cannonball and pancake styles Greenfield Downrigger Weights are made from recycled lead and cast directly during the recycling process, for the lowest environmental impact possible. No secondary smelting or emissions are used in...

BoatBuckle HLS Tie-Down System Storage Mount - 740524

Velcro Tie-down systems featuring BoatBuckle Brand’s exclusive ‘Plus’ features. Sur-Grip Release tab for a comfortable, secure hold. Rubber Grommets offer maximum protection keeping metal hardware away from equipment.Kimpex Data: Barcode:...

Sea Dog Rod Holder - Surface Mount - 738299

The Triple ThreatTM Rod Holder is your one stop for all your reel styles. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to...

Sea Dog Rod Holder - Side Mount - 738297

These Side Mount Rod Holders feature an integral, molded-in standoff located on the back of the rod holder. This standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Proudly constructed in the USA of injection...

Sea Dog Three Pole Rod Holder - 738294

Our Triple ThreatTM Three Pole Rod Holder is proudly made in the USA with recycled materials. Features the ability to hold bait, cast, and fly fishing rods/reels. These three-pole, side-mount rod holders come equipped with a built-in knife and plier...

Sea Dog Three Pole Rod Holder - 738293

Our Triple ThreatTM Three Pole Rod Holder is proudly made in the USA with recycled materials. Features the ability to hold bait, cast, and fly fishing rods/reels. These three-pole, side-mount rod holders come equipped with a built-in knife and plier...

Dometic Corp Pro-Pedal Foot Throttle - 791234

Customizable Foot Throttle Control For High Performance Boats Driving a high speed bass boat typically requires the driver to keep both hands on the wheel. Pro-Pedal is easy to install and can accept the thottle cable the front, behind, or above the...

Dometic Corp Pro-Pedal Foot Throttle and Adjustable Slider Plate - 791054

Customizable Foot Throttle Control For High Performance Boats Driving a high speed bass boat typically requires the driver to keep both hands on the wheel. Pro-Pedal is easy to install and can accept the thottle cable the front, behind, or above the...

C.E. Smith Pontoon adjustable Rod Holder - 732545

All the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners...

Attwood Rod Holder with Mount - 700801

Pro-Series rod holders are designed for use with casting and spinning rods. Large, easy-grip cam lock provides easy 160º vertical adjustment for a variety of rod tip height settings. Heavy duty, deep-tooth gear lock securely holds rod holder in...

ERICKSON Universal Tarpaulins 20' x 40' - 719725

All-purpose tarp will work for a variety of applications - storage,transportation, recreation, construction, etc. Lightweight, flexible design makes tarp easy to use and easy to store Nylon strands are woven horizontally and vertically in a tight, 8 x 8...

ERICKSON Universal Tarpaulins 10' x 12' - 719724

All-purpose tarp will work for a variety of applications - storage,transportation, recreation, construction, etc. Lightweight, flexible design makes tarp easy to use and easy to store Nylon strands are woven horizontally and vertically in a tight, 8 x 8...

ERICKSON Universal Tarpaulins 10' x 12' - 719723

All-purpose tarp will work for a variety of applications - storage,transportation, recreation, construction, etc. Lightweight, flexible design makes tarp easy to use and easy to store Nylon strands are woven horizontally and vertically in a tight, 8 x 8...

Attwood HD Rod Holder - 700179

Attwood’s Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Bi-Axis mount. All the Pro-Series unique, patented features you’ve come to expect, with the ability to mount in multiple configurations...

Dometic Corp GPS Receiver - 705118

Our GPS speedometer can be connected to an existing NMEA 0183 receiver if you have one already installed or you can purchased separately our custom design GPS receiver/antenna. This product is ideal for all speed applications and is particularly useful...

Kimpex Trolling Motor Connector - 745246

Designed to be flush-mounted, this socket makes connection of your trolling motor quick and easy. Wire the plug to the motor end, and some heavy gauge cable from the battery to the socket, and you‘re ready to go. Includes butt connectors. 12V...

KUUMA Grill Cover - Duffle - 751549

For use on a mounted grill as a cover or a portable grill as a tote. Heavy-duty, weather-resistant polyester provides long lasting protection in every storage environment. Kuuma Grill Cover - (for 125-216 Profile) Duffle, Black Helps protect Kuuma...

Sierra Trolling Motor Connector, 5/16" Honda - 717245

Replaces: Honda 17650-ZW9-003 Outboard 5/16" diameter Rectangular lockingKimpex Data: Barcode: 779422559570 Supplier Number: 18-80408Kimpex Catalog Number: 118-80408